Ambermatic lens of ray ban

A few of the most notable variations of the Ray-Ban lens technology include Changeables, photochromatic lenses which react to the sun’s brightness to protect your eyes, darkening and lightening an amazing range of 75% range depending on light conditions. Fake Ray-Bans Kalichrome shooter and outdoorsman sunglasses were yellow lens shooters designed for shooting sports conducted in hazy, foggy, and low light conditions.

The yellow lenses actually intensify light and increase contrast, and wearing them on bright sunny days might hurt your eyes a bit but you will at least look cool. The shooter design is similar to the aviator but sits higher up on the face, and the space between lenses is separated by a circular ring that is referred to as the bullet hole, and it has cable temples to give a secure fit for active pursuits. Ray-Ban replica “smart” Ambermatic lenses adjust to the prevailing light. On cloudy and overcast days, Ray-Ban Ambermatic sunglasses are lightly tinted and amber colored to cut through haze and sharpen vision. On sunny, warm days they turn brown to block the glare, and on sunny, cold days they change to dark gray for superior protection from direct and reflected glare.
We are also asked a lot about characteristics and marks on real vintage Ray-Ban aviator sunglasses. The aviator frame should be solid and sturdy with de minimus wear to the gold plating regardless of the age of the aviators. You can find vintage aviators with the typical B&L Ray-Ban gold plating as well as aviators which are either 10k or 12k gold filled. In almost all cases, the top of the frame at the nose bridge will be marked with B&L Ray-Ban U.S.A. sometimes followed by the frame and lens size and sometimes followed with 10k GF or 12k GF designations, all etched in the metal of the frame.

Most aviators will also have B&L Ray-Ban USA inscribed in the frame below the nose bridge as well depending on the design. The small etched BL in the lenses near the hinge points was not used in Ray-Ban replica sunglasses lens production until the late 1970’s, and the cursive white Ray-Ban trademark logo on the lens was introduced in late 1982 and subsequently present on all Ray-Ban sunglasses from 1983 onward.